Pepperl+Fuchs BebcoEPS Home
only search www.bebcoeps.com
Pepperl+Fuchs Corporate Site
  Bebco EPS- The Leaders in Purging Technology ®
Products | Troubleshooting | Literature | Where to Buy | About Us | Contact Us 
    Type X Purge System
 

The Type X Purge System

  • Class I applications- the Type X purge system operates by forcing air or an inert gas through the enclosure until all of the hazardous gas is removed (purging). After purging, constant pressure is maintained within the enclosure and equipment inside the enclosure is energized. If enclosure pressure drops below its minimum, enclosure power is cut and a purging sequence begins.
  • Class II applications- the enclosure must be free of all combustible material. It is pressurized before powering the equipment inside. There is no purging of the Class II, Type X system.
  • Vents are required for most Type X purge enclosures.
 
  6000 Series   2000 Series
  6000 Series Type X / Ex px , Class I & II, Division 1 / Zone 1 & 21 to non-hazardous area applications. ATEX, UL, cUL classified   2000 Series Type X - Class I, Division 1 to non-hazardous area applications. UL, cUL & FM classified
 
 
Type X / Ex px , Class I & II, Division 1 / Zone 1 & 21 to non-hazardous area applications. ATEX, UL, cUL classified
 
 
Type X- Class I, Division 1 to non-hazardous area applications. UL, cUL & FM classified
Type X- Class II, Division 1 to non-hazardous area applications. UL, cUL & FM classified

Build Your Own BebcoEPS Purge System