Bebco EPS Products - Type Z Purge System

Bebco EPS- The Leaders in Purging Technology ®

Bebco EPS > Products > Type Z Purge System

For Class I applications this system operates by forcing air or an inert gas through the enclosure for a specified time until all of the hazardous gas has been removed (purging). After purging, a constant pressure with the enclosure is maintained and the equipment with the enclosure can be energized. Loss of safe pressure requires immediate attention if power is not discontinued to the enclosure.

For Class II applications no purging is performed but the enclosure must be cleaned of all combustible material, then pressurized before energizing the equipment with the enclosure. Loss of safe pressure requires immediate attention if power is not discontinued to the enclosure.

	3000 Series		1000 Series
	Class I, Division 2 area application		Class I, Division 2 area application


Type Z- Class I, Division 2 / Zone 2 to non-hazardous area applications. UL, cUL, FM & ATEX classified
3003- For enclosure volumes up to 90 cu. ft. 3004- For enclosure volumes up to 250 cu. ft.


Type Z- Class I, Division 2 to non-hazardous area applications. UL, cUL & FM classified
1001A-CI - For enclosure volumes up to 2 cu. ft. 1002 - For enclosure volumes up to 15 cu. ft. 1003 - For enclosure volumes up to 75 cu. ft. 1004 - For enclosure volumes up to 200 cu. ft. 1005 - For enclosure volumes up to 450 cu. ft.
Type Z- Class II, Division 2 to non-hazardous area applications. UL, cUL & FM classified
1001A-CII - For enclosure volumes up to 10 cu. ft. 1001B-CII - For enclosure volumes up to 50 cu. ft. 1001C-CII - For enclosure volumes up to 250 cu. ft.

How May We Help You?