Purge / pressurization enclosure protection systems keep general-purpose equipment safe when located in hazardous (classified) areas. BebcoEPS Purge enclosures and accessories offer the safest and most economical means of installing electrical equipment in a hazardous location.
- Process control, measuring and recording equipment that was once pneumatic is now typically general purpose electronic equipment.
- Energy efficient motors and switchgear now use electronic accessories for position, speed or process control. This makes them unsuitable for use in hazardous locations.
- Equipment such as robotic manipulators, CNCs, batch weigh/count and filling systems, analyzers, programmable controllers and CRT work stations are more common in the industrial environment. Most cannot be economically installed in a hazardous location by using explosion proof enclosures or intrinsic safety barriers, alone.
- Most modern electronic equipment is expensive and delicate. It requires environmental protection that cannot be provided by explosion proof enclosures or intrinsic safety barriers.
|
Intrinsic Safety Barriers are designed to limit the current and voltage conducted through a device's power or signal wiring. This limitation prevents…
>> More on
Intrinsic Safety Barriers |
 |
| |
 |
Pepperl+Fuchs BebcoEPS purge/ pressurization units are designed to supply one or more protected enclosures with
a clean instrument air or inert gas. This process...
>> More on BebcoEPS Purge Systems
|
|
|
|
|
